Fabric Pneumatic Bursting Tester TF142C

TESTEX Textile testing by application : Fabric

Application

Pneumatic Bursting Tester, to determine the bursting pressure of fabrics using pneumatic test method, including knits, woven fabric, non-woven fabric, laminated fabric, and other craft-made fabric.

A test specimen is clamped over an expansive diaphragm by a circular clamping ring; increasing compressed air pressure is applied to the underside of the diaphragm, causing distension of the fabric until the test specimen bursts; the bursting strength and distension are determined.

Real-time testing-curve is shown on the Bursting software. The machine can also be controlled easily by the graphics touch-screen.

Specifications/ Features

• Automatic clamping and burst test, automatic calibration, automatic data processing, and test report output.
• It can be controlled by its easy to use graphics touch-screen instead of computer
• Bursting pressure up to 800KPa, accuracy ≤ ±0.2%F•S, run rate ≤60Kpa/s
• Burst distension up to 70mm
• Equipped with a lamp for clear observation
• The transparent acrylic cover ensures safe operation
• 4 most commonly used test areas are available and are easily shifted
• Test Heads 100, 50, 10, 7.3 cm² (112.8, 79.8, 35.7, 30.5 mm Dia.)

Optional Accessories

Diaphragms       pack of 10

Weight

180 kg

Power

220/110 V

50/60 Hz

0.4~0.7 MPa

Dimensions

Length: 470 mm

Width: 490 mm

Height: 780 mm

Standards

ISO 13938-2

GB/T 7742.2